This article explains how to set up Papoo CMS on Ubuntu Linux with Nginx support.
CMS Papoo is a free, SEO-optimized, user-friendly content management system (CMS) built on the LAMP / LEMP stack, which helps web admins and users create great websites and online portals.
The Open Source version is free to download and use. It has an intuitive user interface, granularly administers users and groups, and a responsive design that supports all modern devices.
For more about Papoo, please check their Homepage
To get started with installing Papoo, follow the steps below:
Install Nginx HTTP Server
Papoo requires a web server; the Nginx HTTP server is the most popular open-source web server available today. To install the Nginx server, run the commands below:
sudo apt update sudo apt install nginx
After installing Nginx, the commands below can be used to stop, start, and enable the Nginx service to always start up with the server boots.
sudo systemctl stop nginx.service sudo systemctl start nginx.service sudo systemctl enable nginx.service
Now that Nginx is installed, browse your browser to the URL below to test whether the web server works.
http://localhost
If you see the page above, then Nginx is successfully installed.
Install MariaDB Database Server
Papoo also requires a database server to store its content. MariaDB is a great place to start if you want a genuinely open-source database server. To install MariaDB, run the commands below:
sudo apt-get install mariadb-server mariadb-client
After installing MariaDB, the commands below can be used to stop, start, and enable the MariaDB service to always start up when the server boots.
Run these on Ubuntu 16.04 LTS
sudo systemctl stop mysql.service sudo systemctl start mysql.service sudo systemctl enable mysql.service
Run these on Ubuntu 18.10 and 18.04 LTS
sudo systemctl stop mariadb.service sudo systemctl start mariadb.service sudo systemctl enable mariadb.service
Next, run the commands below to secure the database server with a root password if you were not prompted to do so during the installation.
sudo mysql_secure_installation
When prompted, answer the questions below by following the guide.
- Enter current password for root (enter for none): Just press the Enter
- Set root password? [Y/n]: Y
- New password: Enter password
- Re-enter new password: Repeat password
- Remove anonymous users? [Y/n]: Y
- Disallow root login remotely? [Y/n]: Y
- Remove test database and access to it? [Y/n]: Y
- Reload privilege tables now? [Y/n]: Y
Now that MariaDB has been installed run the commands below to test whether the database server was successfully installed.
sudo mysql -u root -p
Type the root password when prompted.
If you see a similar screen as shown above, then the server was successfully installed.
Install PHP 7.2-FPM and Related Modules
Papoo is a PHP-based CMS, and PHP is required. However, PHP 7.2-FPM may not be available in Ubuntu default repositories. To run PHP 7.2-FPM on Ubuntu 16.04 and previous, you may need to run the commands below:
sudo apt-get install software-properties-common sudo add-apt-repository ppa:ondrej/php
Then update and upgrade to PHP 7.2-FPM
sudo apt update
Next, run the commands below to install PHP 7.2-FPM and related modules.
sudo apt install php7.2-fpm php7.2-common php7.2-mysql php7.2-gmp php7.2-curl php7.2-intl php7.2-mbstring php7.2-xmlrpc php7.2-gd php7.2-xml php7.2-cli php7.2-zip
After installing PHP 7.2, run the commands below to open Nginx’s PHP default configuration file.
sudo nano /etc/php/7.2/fpm/php.ini
The lines below are a good setting for most PHP-based CMS. Update the configuration file with these and save.
file_uploads = On allow_url_fopen = On short_open_tag = On memory_limit = 256M cgi.fix_pathinfo = 0 upload_max_filesize = 100M max_execution_time = 360 date.timezone = America/Chicago
Restarting the Nginx web server whenever you change the PHP configuration file would be best. To do so, run the commands below:
sudo systemctl restart nginx.service
Once PHP is installed, create a test file called phpinfo.php in the Nginx default root directory to test whether it’s functioning. ( /var/www/html/)
sudo nano /var/www/html/phpinfo.php
Then, type the content below and save the file.
<?php phpinfo( ); ?>
Next, open your browser and browse to the server’s hostname or IP address, followed by phpinfo.php
http://localhost/phpinfo.php
You should see the PHP default test page.
Create Papoo CMS Database
Now that you’ve installed all the packages required for Papoo to function, continue below to start configuring the servers. First, run the commands below to create a blank Papoo database.
To log on to the MariaDB database server, run the commands below.
sudo mysql -u root -p
Then, create a database called papoo
CREATE DATABASE papoo CHARACTER SET utf8 COLLATE utf8_general_ci;
Create a database user called papoouser with a new password
CREATE USER 'papoouser'@'localhost' IDENTIFIED BY 'new_password_here';
Then, grant the user full access to the database.
GRANT ALL ON papoo.* TO 'papoouser'@'localhost' IDENTIFIED BY 'user_password_here' WITH GRANT OPTION;
Finally, save your changes and exit.
FLUSH PRIVILEGES; EXIT;
Download Papoo’s Latest Release
To get Papoo’s latest release, you may want to download it from its download page. Or use the commands below to use wget and get it downloaded.
Once downloaded, extract the downloaded content into the newly created Papoo directory.
cd /tmp wget https://www.papoo.de/index.php?menuid=5bd66_papoo-light-v1811.zip sudo mkdir /var/www/html/papoo sudo unzip 5bd66_papoo-light-v1811.zip -d /var/www/html/papoo
Next, run the commands below to set the correct permissions for the Papoo root directory and give Nginx control.
sudo chown -R www-data:www-data /var/www/html/papoo/ sudo chmod -R 755 /var/www/html/papoo/
Configure Nginx
Finally, configure the Nginx site configuration file for Papoo. This file will control how users access Papoo content. Run the commands below to create a new configuration file called papoo
sudo nano /etc/nginx/sites-available/papoo
Then copy and paste the content below into the file and save it. Replace the highlighted line with your domain name and directory root location.
server {
listen 80;
listen [::]:80;
root /var/www/html/papoo;
index index.php index.html index.htm;
server_name example.com www.example.com;
client_max_body_size 100M;
autoindex off;
location / {
try_files $uri $uri/ /index.php?$query_string;
}
location ~ \.php$ {
include snippets/fastcgi-php.conf;
fastcgi_pass unix:/var/run/php/php7.2-fpm.sock;
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
include fastcgi_params;
}
}
Save the file and exit.
Enable the Papoo
After configuring the VirtualHost above, please enable it by running the commands below.
sudo ln -s /etc/nginx/sites-available/papoo /etc/nginx/sites-enabled/ sudo systemctl restart nginx.service
Then open your browser and browse to the server domain name. You should see the complete Papoo setup wizard. Please follow the wizard carefully.
http://example.com
Then, follow the on-screen instructions to complete the setup. Select the installation language and continue.
Next, validate that all requirements are met and accept the licensing terms. Then, continue on the next page to enter the database name and user.
After that, create a root password to manage the backend and complete the installation.
Log on to the backend with the username root and the password you created above.
Enjoy!
For Security Reasons, you should delete the directory setup immediately!
sudo rm -rf /var/www/html/papoo/setup
You should also reset the file’s permissions “/lib/site_conf.php” to 444.
sudo chmod 444 /var/www/html/papoo//lib/site_conf.php
The Administration is under the following address:
http://example.com/interna/
There, you can log in with the username root and your password and manage
Congratulation! You have successfully installed Papoo CMS on Ubuntu 16.04 | 18.04.
You may also like the post below:
Leave a Reply