How to Setup Chyrp-lite CMS with Nginx on Ubuntu Linux

This article describes the steps to install and use Chyrp-lite CMS on Ubuntu Linux with Nginx support.

Chyrp-lite CMS is an open-source, ultra-lightweight blogging engine written in PHP that can be used to create your content and structure with control over everything, including all your HTML.

It is built on an open-source core with support for open standards, which might be very useful in helping you run your digital content.

This CMS platform is designed for ease of use to allow web admins to collaborate and automate engaging experiences with users across multiple devices, including mobile.

For more about Chyrp-lite, please check their Homepage

To get started with installing Chyrp-lite, follow the steps below:

Install Nginx HTTP Server

Chyrp-lite requires a web server, and the Nginx HTTP server is probably the second most popular open-source web server available today. To install the Nginx server, run the commands below:

sudo apt update
sudo apt install nginx

After installing Nginx, the commands below can be used to stop, start, and enable the Nginx service to always start up with the server boots.

sudo systemctl stop nginx.service
sudo systemctl start nginx.service
sudo systemctl enable nginx.service

Now that Nginx has been installed browse your browser to the URL below to test whether the web server works.

http://localhost

If you see the page above, then Nginx is successfully installed.

Install MariaDB Database Server

Chyrp-lite also requires a database server to store its content. MariaDB is a great place to start if you want a genuinely open-source database server. To install MariaDB, run the commands below:

sudo apt-get install mariadb-server mariadb-client

After installing MariaDB, the commands below can stop, start, and enable the service to start when the server boots.

Run these on Ubuntu 16.04 LTS

sudo systemctl stop mysql.service
sudo systemctl start mysql.service
sudo systemctl enable mysql.service

Run these on Ubuntu 18.10 and 18.04 LTS

sudo systemctl stop mariadb.service
sudo systemctl start mariadb.service
sudo systemctl enable mariadb.service

Next, run the commands below to secure the database server with a root password if you were not prompted to do so during the installation.

sudo mysql_secure_installation

When prompted, answer the questions below by following the guide.

Enter current password for root (enter for none): Just press the Enter
Set root password? [Y/n]: Y
New password: Enter password
Re-enter new password: Repeat password
Remove anonymous users? [Y/n]: Y
Disallow root login remotely? [Y/n]: Y
Remove test database and access to it? [Y/n]: Y
Reload privilege tables now? [Y/n]: Y

Once MariaDB is installed, run the commands below to test whether the database server was installed.

sudo mysql -u root -p

Type the root password when prompted.

The server was successfully installed if you see a similar screen.

Install PHP 7.2 and Related Modules

Chyrp-Lite is a PHP-based CMS, and PHP is required. However, PHP 7.2 may not be available in Ubuntu’s default repositories. To run PHP 7.2 on Ubuntu 16.04 and previous, you may need to run the commands below:

sudo apt-get install software-properties-common
sudo add-apt-repository ppa:ondrej/php

Then update and upgrade to PHP 7.2

sudo apt update

Next, run the commands below to install PHP 7.2 and related modules.

sudo apt install php7.2-fpm php7.2-common php7.2-mysql php7.2-gmp php7.2-curl php7.2-intl php7.2-mbstring php7.2-xmlrpc php7.2-gd php7.2-bcmath php7.2-xml php7.2-cli php7.2-zip

After installing PHP 7.2, run the commands below to open Nginx’s PHP default configuration file.

sudo nano /etc/php/7.2/fpm/php.ini

The lines below are a good setting for most PHP-based CMS. Update the configuration file with these and save.

file_uploads = On
allow_url_fopen = On
short_open_tag = On
memory_limit = 256M
cgi.fix_pathinfo = 0
upload_max_filesize = 100M
max_execution_time = 360
date.timezone = America/Chicago

Restarting the Nginx web server whenever you change the PHP configuration file would be best. To do so, run the commands below:

sudo systemctl restart nginx.service

Once PHP is installed, create a test file called phpinfo.php in the Nginx default root directory. ( /var/www/html/)

sudo nano /var/www/html/phpinfo.php

Then, type the content below and save the file.

<?php phpinfo( ); ?>

Next, open your browser and browse to the server’s hostname or IP address, followed by phpinfo.php

http://localhost/phpinfo.php

You should see the PHP default test page.

Create Chyrp-lite Database

Once you’ve installed all the packages required for Chyrp-lite to function, continue below to start configuring the servers. First, run the commands below to create a blank Chyrp-lite database.

To log on to the MariaDB database server, run the commands below.

sudo mysql -u root -p

Then, create a database called chyrp

CREATE DATABASE chyrp;

Create a database user called chyrpuser with a new password

CREATE USER 'chyrpuser'@'localhost' IDENTIFIED BY 'new_password_here';

Then, grant the user full access to the database.

GRANT ALL ON chyrp.* TO 'chyrpuser'@'localhost' IDENTIFIED BY 'user_password_here' WITH GRANT OPTION;

Finally, save your changes and exit.

FLUSH PRIVILEGES;
EXIT;

Download Chyrp-lite Latest Release

To get Chyrp-lite’s latest release, you may want to use the GitHub repository. Install the git tool to download Chyrp-lite packages.

sudo apt install git

After installing curl and Composer above, change into the Nginx root directory and download Chyrp-lite packages from Github.

cd /var/www/html
sudo git clone https://github.com/xenocrat/chyrp-lite.git

Then, run the commands below to set the correct permissions for the Chyrp-lite root directory and give Nginx control.

sudo chown -R www-data:www-data /var/www/html/chyrp-lite/
sudo chmod -R 755 /var/www/html/chyrp-lite/

Configure Nginx

Finally, configure the Apahce2 site configuration file for Chyrp-lite. This file will control how users access WebsiteBaker content. Run the commands below to create a new configuration file called chirp-lite

sudo nano /etc/nginx/sites-available/chyrp-lite

Then copy and paste the content below into the file and save it. Replace the highlighted line with your domain name and directory root location.

server {
    listen 80;
    listen [::]:80;
    root /var/www/html/chyrp-lite;
    index  index.php index.html index.htm;
    server_name  example.com www.example.com;

     client_max_body_size 100M;
  
     autoindex off;

    location / {
        try_files $uri $uri/ /index.php?$query_string;
    }

    location ~ \.php$ {
         include snippets/fastcgi-php.conf;
         fastcgi_pass unix:/var/run/php/php7.2-fpm.sock;
         fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
         include fastcgi_params;
    }
}

Save the file and exit.

Enable the Chyrp-lite Site

After configuring the VirtualHost above, please enable it by running the commands below.

sudo ln -s /etc/nginx/sites-available/chyrp-lite /etc/nginx/sites-enabled/
sudo systemctl restart nginx.service

Then open your browser and browse to the server domain name. You should see the Chyrp-lite setup wizard complete. Please follow the wizard carefully.

http://example.com/install.php

Then, follow the on-screen instructions. Type in the database connection info you created above and create an admin account for the backend. When you’re ready, click Install Me!

That’s it! You can now log on and start creating great posts.

Enjoy~

Congratulation! You have successfully installed Chyrp-lite CMS on Ubuntu 16.04 | 18.04 and 18.10.