How to Install ForkCMS with Apache on Ubuntu Linux

This article describes the steps to install and use ForkCMS on Ubuntu Linux with Apache support.

ForkCMS is a user-friendly open-source content management system (CMS) built on the LAMP or LEMP stack. If you want to install ForkCMS on Ubuntu Linux, you can do it with Apache support.

Apache2 HTTP Server is the most popular web server, and ForkCMS needs it to function correctly. By following the steps to install ForkCMS with Apache on Ubuntu Linux, you can create a personal or business website with great content that can be easily managed on every device.

It’s also a great alternative to PHP-based content management systems like WordPress, Drupal, and Joomla.

For more on ForkCMS, please visit its home page.

How to install ForkCMS on Ubuntu Linux with Apache support

As described above, Fork CMS is a user-friendly open-source content management system (CMS) built on the LAMP or LEMP stack.

Install Apache HTTP Server on Ubuntu

Apache2 HTTP Server is the most popular web server. Install it since ForkCMS needs it.

To install Apache2 HTTP on the Ubuntu server, run the commands below.

sudo apt update
sudo apt install apache2

After installing Apache2, the commands below can stop, start, and enable the Apache2 service to always start up with the server boots.

sudo systemctl stop apache2.service
sudo systemctl start apache2.service
sudo systemctl enable apache2.service

To test the Apache2 setup, open your browser and browse to the server hostname or IP address. You should see the Apache2 default test page, as shown below. When you see that, Apache2 will work as expected.

http://localhost

Install MariaDB Database Server

MariaDB database server is a great place to start when looking at open-source database servers for Magento. To install MariaDB, run the commands below.

sudo apt-get install mariadb-server mariadb-client

After installing MariaDB, the commands below can stop, start, and enable the service to start when the server boots.

Run these on Ubuntu 16.04 LTS

sudo systemctl stop mysql.service
sudo systemctl start mysql.service
sudo systemctl enable mysql.service

Run these on Ubuntu 17.10 and 18.04 LTS

sudo systemctl stop mariadb.service
sudo systemctl start mariadb.service
sudo systemctl enable mariadb.service

After that, run the commands below to secure the MariaDB server by creating a root password and disallowing remote root access.

sudo mysql_secure_installation

When prompted, answer the questions below by following the guide.

Enter current password for root (enter for none): Just press the Enter
Set root password? [Y/n]: Y
New password: Enter password
Re-enter new password: Repeat password
Remove anonymous users? [Y/n]: Y
Disallow root login remotely? [Y/n]: Y
Remove test database and access to it? [Y/n]: Y
Reload privilege tables now? [Y/n]: Y

Restart MariaDB server

Type the commands below to log on to the MariaDB server to test if MariaDB is installed.

sudo mysql -u root -p

Then, type the password you created above to sign on. If successful, you should see a MariaDB welcome message.

Install PHP 7.1-FPM and Related Modules

PHP 7.1-FPM may not be available in Ubuntu default repositories. To install it, you will have to get it from third-party repositories.

Run the commands below to add the below third party repository to upgrade to PHP 7.1-FPM

sudo apt-get install software-properties-common
sudo add-apt-repository ppa:ondrej/php

Then update and upgrade to PHP 7.1-FPM

sudo apt update

Next, run the commands below to install PHP 7.2 and related modules.

sudo apt install php7.2 libapache2-mod-php7.2 php7.2-common php7.2-sqlite php7.2-curl php7.2-intl php7.2-mbstring php7.2-xmlrpc php7.2-mysql php7.2-gd php7.2-xml php7.2-cli php7.2-zip

After installing PHP 7.2, run the commands below to open the PHP default config file for Apache2.

sudo nano /etc/php/7.2/apache2/php.ini

Then, save the changes on the following lines below in the file. The value below is an ideal setting to apply in your environment.

file_uploads = On
allow_url_fopen = On
short_open_tag = On
memory_limit = 256M
upload_max_filesize = 100M
max_execution_time = 360
date.timezone = America/Chicago

After making the change above, please save the file and close it.

After installing PHP and related modules, you must restart Apache2 to reload PHP configurations.

To restart Apache2, run the commands below

sudo systemctl restart apache2.service

To test PHP 7.2 settings with Apache2, create a phpinfo.php file in the Apache2 root directory by running the commands below

sudo nano /var/www/html/phpinfo.php

Then, type the content below and save the file.

<?php phpinfo( ); ?>

Save the file. Then browse to your server hostname followed by /phpinfo.php

http://localhost/phpinfo.php

You should see the PHP default test page.

Create ForkCMS Database

Once you’ve installed all the packages required for ForkCMS to function, continue below to start configuring the servers. First, run the commands below to create a blank Magento database.

To log on to the MariaDB database server, run the commands below.

sudo mysql -u root -p

Then, create a database called fork cms.

CREATE DATABASE forkcms;

Create a database user called forkcmsuser with a new password

CREATE USER 'forkcmsuser'@'localhost' IDENTIFIED BY 'new_password_here';

Then, grant the user full access to the database.

GRANT ALL ON forkcms.* TO 'forkcmsuser'@'localhost' IDENTIFIED BY 'user_password_here' WITH GRANT OPTION;

Finally, save your changes and exit.

FLUSH PRIVILEGES;
EXIT;

Download and Install ForkCMS

Run the commands below to download ForkCMS content.

cd /tmp && wget https://www.fork-cms.com/frontend/files/releases/forkcms-5.2.3.tar.gz
tar -xvzf forkcms-5.2.3.tar.gz
sudo mv forkcms /var/www/html/forkcms

Next, run the commands below to change the root folder permissions.

sudo chown -R www-data:www-data /var/www/html/forkcms/
sudo chmod -R 755 /var/www/html/forkcms/

Configure Apache2 ForkCMS Site

Finally, configure the Apache2 configuration file for ForkCMS. This file will control how users access ForkCMS content.

Run the commands below to create a new configuration file called forkcms.conf.

sudo nano /etc/apache2/sites-available/forkcms.conf

Then copy and paste the content below into the file and save it. Replace the highlighted line with your domain name and directory root location.

<VirtualHost *:80>
     ServerAdmin admin@example.com
     DocumentRoot /var/www/html/forkcms
     ServerName example.com

     <Directory /var/www/html/forkcms/>
          Options FollowSymlinks
          AllowOverride All
          Require all granted
     </Directory>

     ErrorLog ${APACHE_LOG_DIR}/error.log
     CustomLog ${APACHE_LOG_DIR}/access.log combined

</VirtualHost>

Save the file and exit.

After configuring the VirtualHost above, please enable it by running the commands below.

Enable the ForkCMS Site

After configuring the VirtualHost above, please enable it by running the commands below, then restart the Apache2 server.

sudo a2ensite forkcms.conf
sudo a2enmod rewrite
sudo systemctl restart apache2.service

Next, open your browser, go to the URL, and continue with the installation.

http://example.com/install.php

Click Next to continue the installation wizard. One of the most remarkable features of Fork CMS is the built-in multilingual support. In step 2, the languages are chosen for both the front and back end. The default language you select in this step is shown if the locale module can’t determine the browser’s language.

Type in the database connection info and create an administrator account to manage the platform in the backend. and continue

After entering the info above, click Finish Installation to install the CMS.

You’ll find the private website configuration system at http://example.com/private

That should do it!

Comments

Leave a Reply