How to Setup ClassicPress with Nginx on Ubuntu Linux

ClassicPress is a fork and modified version of WordPress that serves the business website market. It is still being developed and will serve as an alternative to WordPress with Gutenberg.

With ClassicPress, you get a clean and simple administrative area without clutter. Webmasters and users who still love WordPress’s classic interface will feel comfortable building online databases, e-commerce, and multilingual sites.

If you want an enhanced version of WordPress that works like the original, then ClassicPress CMS is a good place to start. ClassicPress is built on an open-source core with support for open standards, which might be very useful in helping you run your digital content.

For more about ClassicPress, please check their Homepage

To get started with installing ClassicPress, follow the steps below:

Install Nginx HTTP Server

ClassicPress requires a web server, and the Nginx HTTP server is probably the second most popular open-source web server available today. To install the Nginx server, run the commands below:

sudo apt update
sudo apt install nginx

After installing Nginx, the commands below can be used to stop, start and enable the Nginx service to always start up with the server boots.

sudo systemctl stop nginx.service
sudo systemctl start nginx.service
sudo systemctl enable nginx.service

Now that Nginx is installed open your browser and browse to the URL below to test whether the web server is working.

http://localhost

If you see the page above, then Nginx is successfully installed.

Install MariaDB Database Server

ClassicPress also requires a database server to store its content. MariaDB is a great place to start if you’re looking for a genuinely open-source database server. To install MariaDB run the commands below:

sudo apt-get install mariadb-server mariadb-client

After installing MariaDB, the commands below can stop, start and enable the MariaDB service to start up when the server boots.

Run these on Ubuntu 16.04 LTS

sudo systemctl stop mysql.service
sudo systemctl start mysql.service
sudo systemctl enable mysql.service

Run these on Ubuntu 18.10 and 18.04 LTS

sudo systemctl stop mariadb.service
sudo systemctl start mariadb.service
sudo systemctl enable mariadb.service

Next, run the commands below to secure the database server with a root password if you were not prompted to do so during the installation.

sudo mysql_secure_installation

When prompted, answer the questions below by following the guide.

Enter current password for root (enter for none): Just press the Enter
Set root password? [Y/n]: Y
New password: Enter password
Re-enter new password: Repeat password
Remove anonymous users? [Y/n]: Y
Disallow root login remotely? [Y/n]: Y
Remove test database and access to it? [Y/n]: Y
Reload privilege tables now? [Y/n]: Y

Once MariaDB is installed, run the commands below to test whether the database server was successfully installed.

sudo mysql -u root -p

Type the root password when prompted.

The server was successfully installed if you see a similar screen as shown above.

Install PHP 7.2 and Related Modules

ClassicPress is a PHP-based CMS, and PHP is required. However, PHP 7.2 may not be available in Ubuntu’s default repositories. To run PHP 7.2 on Ubuntu 16.04 and previous, you may need to run the commands below:

sudo apt-get install software-properties-common
sudo add-apt-repository ppa:ondrej/php

Then update and upgrade to PHP 7.2

sudo apt update

Next, run the commands below to install PHP 7.2 and related modules.

sudo apt install php7.2-fpm php7.2-common php7.2-mysql php7.2-gmp php7.2-curl php7.2-intl php7.2-mbstring php7.2-xmlrpc php7.2-gd php7.2-xml php7.2-cli php7.2-zip

After installing PHP 7.2, run the commands below to open Nginx’s PHP default configuration file.

sudo nano /etc/php/7.2/fpm/php.ini

The lines below are a good setting for most PHP-based CMS. Update the configuration file with these and save.

file_uploads = On
allow_url_fopen = On
short_open_tag = On
memory_limit = 256M
cgi.fix_pathinfo = 0
upload_max_filesize = 100M
max_execution_time = 360
date.timezone = America/Chicago

You should restart the Nginx web server whenever you make changes to the PHP configuration file. To do so, run the commands below:

sudo systemctl restart nginx.service

Once PHP is installed, create a test file called phpinfo.php in the Nginx default root directory. ( /var/www/html/)

sudo nano /var/www/html/phpinfo.php

Then type the content below and save the file.

<?php phpinfo( ); ?>

Next, open your browser and browse to the server’s hostname or IP address, followed by phpinfo.php

http://localhost/phpinfo.php

You should see the PHP default test page.

Create ClassicPress Database

Once you’ve installed all the packages required for ClassicPress, continue below to start configuring the servers. First, run the commands below to create a blank ClassicPress database.

To log on to the MariaDB database server, run the commands below.

sudo mysql -u root -p

Then create a database called classicpress

CREATE DATABASE classicpress;

Create a database user called classicpressuser with a new password

CREATE USER 'classicpressuser'@'localhost' IDENTIFIED BY 'new_password_here';

Then grant the user full access to the database.

GRANT ALL ON classicpress.* TO 'classicpressuser'@'localhost' IDENTIFIED BY 'user_password_here' WITH GRANT OPTION;

Finally, save your changes and exit.

FLUSH PRIVILEGES;
EXIT;

Download ClassicPress Latest Release

To get ClassicPress’s latest release, you may want to download it from its download page. Use the link below to get the latest. Unfortunately, classicPress is still in an Alpha state at this writing.

Download and extract the downloaded content into the Nginx root directory.

https://www.classicpress.net/download/

cd /tmp
wget https://github.com/ClassicPress/ClassicPress-release/archive/1.0.0-alpha1.zip
sudo unzip -d /var/www/html/classicpress /tmp/1.0.0-alpha1.zip

Then run the commands below to set the correct permissions for the ClassicPress root directory and give Nginx control.

sudo chown -R www-data:www-data /var/www/html/classicpress/
sudo chmod -R 755 /var/www/html/classicpress/

Configure Nginx

Finally, configure the Apahce2 site configuration file for ClassicPress. This file will control how users access ClassicPress content. Run the commands below to create a new configuration file called classicpress

sudo nano /etc/nginx/sites-available/classicpress

Then copy and paste the content below into the file and save it. Replace the highlighted line with your domain name and directory root location.

server {
    listen 80;
    listen [::]:80;
    root /var/www/html/classicpress;
    index  index.php index.html index.htm;
    server_name  example.com www.example.com;

     client_max_body_size 100M;

     autoindex off;

     location / {
        try_files $uri $uri/ /index.php?$args;
       }

    location ~ \.php$ {
         include snippets/fastcgi-php.conf;
         fastcgi_pass unix:/var/run/php/php7.2-fpm.sock;
         fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
         include fastcgi_params;
    }
}

Save the file and exit.

Enable the ClassicPress and Rewrite Module

After configuring the VirtualHost above, please enable it by running the commands below.

sudo ln -s /etc/nginx/sites-available/classicpress /etc/nginx/sites-enabled/
sudo systemctl restart nginx.service

Then open your browser and browse to the server domain name. You should see the ClassicPress setup wizard complete. Please follow the wizard carefully.